Drawbar, 3MT x 3/8″-16, 7×14, with Washer – Mini Lathe

This is the 3/8″-16 drawbar for HiTorque mini lathes with the 3 Morse Taper spindle. Also fits SIEG SC2 and C3 mini lathes.

This drawbar is a 3/8″-16 x 6.5″ cap screw and a flat washer. They are both hardened for long life.

Made from Grade 8 steel, these screws can be used in high-stress applications, such as valves, pumps, motors, and automotive suspension systems. They are at least 25% stronger than medium-strength steel screws. Grade 8 steel hex head screws are marked with six radial lines. Length is measured from under the head.

Zinc-flake-coated steel screws are about five times as corrosion resistant as zinc yellow-chromate plated screws and have good resistance to salt water and acids. Also known as ultra coat and armor coat. To maintain corrosion resistance, use these screws with zinc-flake-coated nuts and washers.

See Specifications Tab for more information on this product.

See the Compatibility tab for machines that work with this product.