SAWSTOP PCS175-ATGP36 – Professional 1.75HP 120V 60Hz 36″ Pro T-Glide Advance

The Professional Cabinet Saw is SawStops top selling cabinet saw, offering unmatched fit and finish and best-in-class cutting performance.

36-INCH T-GLIDE FENCE ASSEMBLY: The 36-inch T-Glide Fence & Rail are made of heavy-gauge steel for sure lockdown and reliably square cutting for years without deflection.

UNMATCHED QUALITY: The trunnion and arbor are built for precision, strength and stability. The gas piston elevation delivers smooth and easy adjustability. Table flatness is measured diagonally at 0 maximum gap.

DUST COLLECTION: 99% dust collection is delivered above the table with the available dust collection blade guard (Model # TSG-DC, sold separately), and below the table with advanced shrouding around the blade. Available Overarm Dust Collection (Model # TSA-ODC, sold separately) routes dust away from the blade and into the 4 port.

SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch.

RELIABILITY: The Control Box houses the on-off switch, power paddle, and on-board computer, and constantly checks that all systems are working to reliably keep you safe.

Features

• 36″ Professional T-Glide Fence System provides smooth operation, precision measurement and sure lockdown without deflection.
• Unmatched fit and finish with a keen attention to detail make the Professional Cabinet Saw SawStop’s most popular saw.
• SawStop Safety System stops on contact with skin.
• ASSEMBLY: 1.75HP Professional Cabinet Saw with 36 Professional T-Glide fence system, rails & extension table
• Dimension: 69 1/8″ w, 33″ d, 34″ h

Includes

• (2) Cast Iron Extension Wings
• (1) Miter Gauge
• (1) Micro Blade Guard (1.75HP Models)
• (1) Dust Collection Blade Guard (3HP Models)
• (1) Riving Knife
• (2) Blade Wrenches
• (1) Push Stick
• (1) 10 Blade
• (1) Standard Lockdown Insert
• (1) Standard Brake Cartridge
• (1) Owners Manual
• (2) Hardware Packs
• (1) 3mm Hex Key
• (1) 5mm Hex Key
• (1) 8mm Hex Key
• (1) Blade Spacing Adjustment Gauge

Specifications

• 36″ Rip Capacity PCS175 or PCS31230 -TGP236: 36″ T-Glide Fence Assembly

• Motor Option(s) (60Hz TEFC): 1.75 or 3 HP available

• Overall saw dimensions 36 in: 69 1/8″ W x 33″ D x 34″ H

• Motor Configuration 1PCS175: 1.75 HP, 120v, 14 A (user config. to 220v w/optional kit available for purchase).

• Saw body footprint: 19 3/8″ W x 19 3/8″ D (Cabinet)

• Cast iron table: 20″ W x 27″ D

• Extension wings: 12″ W x 27″ D each

• Cast iron table (w/ extension wings): 44″ W x 27″ D

• Extension table 36 in: 23 W x 27 D

• Shipping weights – w/ 36 in fence systems: 480 lbs

• Shipping dimensions (saw body only): 42W x 31D x 30H

• Shipping weight (approx.): (table saw only) 375 lbs

• Assembled weights – w/ 36 in fence systems: 408 lbs

• Weights – table saw only: 317 lbs

• Blade: 40-tooth, prof. grade, 5/8″ arbor

• Blade diameter: 10″

• Blade tilt: Left

• Blade kerf: 0.118″ (3mm)

• Blade plate thickness: 0.078″ (2mm)

• Max. depth of cut, blade at 0: 3 1/8″

• Max. depth of cut, blade at 45: 2 1/4″

• Max. rip, left of blade (w/36 or 52 T-Glide Fence): 12 1/2″

• Max. rip, right of blade (w/36 Fence): 36 1/2″ (w/optional 36″ rails)

• Dado diameter: 8″ (requires dado brake cartridge & insert)

• Dado max. width: 29/32

• Arbor diameter at blade: 5/8″

• Main bearing size: 62mm OD x 30mm ID

• Second bearing size: 52mm OD x 25mm ID

• Table in front of blade (max. elevation): 10 1/4″

• Table behind blade (max. elevation): 7 1/2″

• Arbor Runout: 0.001″ Maximum allowable runout

• Table flatness measured diagonally: 0″ Maximum gap

• Blade alignment with miter slot: 0″ Maximum displacement

• Deviation of miter gauge indexing stops from actual: 0.25

• Alignment between splitter and blade: 0″ Maximum difference

• Miter slots T-shaped: 3/4″ at top, 1″ at bottom, 3/8″ deep

• Miter slots center: 11 1/8″ center-to-center

• Miter slots info: 5 1/2″ (arbor flange to center of right slot)

• Dust collection port diameter: 4″

• Riving knife / splitter thickness: 0.090″ (2.3 mm)

• Dust collection blade guard (optional on 1.75 HP saws): polycarbonate, extends 1-3/16″ right of blade

• Blade guard: (dust collection) port diameter 1-1/2″ Outside, 1-1/4″ Inside

• Insert: zero clearance, phenolic core, melamine surfaces

• Micro blade guard (standard on 1.75 HP saws): polycarbonate, extends 1″ right of blade

• Hand wheels: 7″ diameter, cast iron w/ chrome handle

• Belts: 2 V-ribbed belts – arbor b. static dissipative